When in necessity for perfected powder coating Hickory NC is a nice place to give first consideration. Powder coating is the activity of painting objects or surfaces with free-flowing dry powder paints. The technique has been confirmed to be superior to traditional liquid paints due to many benefits that are associated with it. One of the key differences between these two kinds of coats is that traditional liquid paints require solvents whilst dry powders do not.
When painting an object or surface by using this method, there are three basic steps that need to be followed in the very sequence they come. The first step involves preparing the surface to be painted before the actual application of the paint. The second step is painting and then the curing process comes in the third place.
Before even commencing the preparation of surfaces to be painted, one must consider materials the surfaces are made of. Materials should dictate the kind of powder to be used to do the finishing. Coating process is carried our using two forms of polymers, thermoplastic and thermoset. The two polymers are made to bond with a variety of metal types to give best results. Coats that do well on cars may not do that well on small home decorations.
The coats sprayed on objects adhere on every part of the surface. This has the meaning that it could seal off bearings, bolts and nuts, clamps and any other surfaces that might need opening later. There is therefore the need to thoroughly clean a surface before applying the coat. Rust scale, dirt, mill, and foreign materials must be eradicated using suitable cleaning techniques.
Hard metals like cast iron and steel could be cleaned using bead and/or abrasive blasting. Oil, paint, grease, light sanding, and other chemicals could be eliminated from surfaces using the chemical solvent cleaning method. Chemical solvent cleaning method must be utilized for finishing surface preparation process. Soft or smooth alloy metals like aluminium and magnesium may be eliminated by use of wire brushing, sanding, and solvent cleaning. Sand paper could be applied on certain forms of contaminants.
The actual coating exercise is performed using guns or compressed air sprayers. The guns or compressed air electro-statically charges the dry powder particles to make them adhere onto the surfaces being painted. The surfaces are usually grounded for particle bonding to take place. Guns appear in diverse makes and could be bought from any store for as low as a hundred US Dollars.
Curing must be performed depending on the metal type under consideration. If the article is adequately small, traditional kitchen ovens can work just nicely otherwise a infrared heat lantern or other flameless sources of heat could be employed. Application of dry coats on already heated or warmed substrates is also an alternative that most painters are settling for currently. Curing should take approximately 10 to 15 minutes.
When in need of well done powder coating Hickory NC presents a nice place to check out. There are many companies that provide the service at very reasonable costs. They can be contacted for their services at any time. The internet can provide some contacts to call.
When seeking for a specialist in powder coating Hickory NC locals should always turn to this website www.diversifiedfinishers.com. For your convenience we have included our contact details on this page http://www.diversifiedfinishers.com.